Siemens SINUMERIK 840C Operator's Manual page 108

01.99
Example for
teaching-in block
by block
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
First teach-in the rough contour. To do this approach positions 1 to 5 with the
handwheel and press the GENERATE BLOCK softkey to save the positions in
the part program. In the second step, run the program up to position 3.
Positions 6 to 9 are each approached using the handwheel, inserted in the part
program using the GENERATE BLOCK softkey and executed by pressing
NC Start. Finally run the program until the end.
Teach-in rough contour
2
1
Run up to stop point
and refine
Start
End
Fig. 4-18 Block by block teach-in 1
It is only possible to teach or edit in the following block. You must observe the
machining sequence. Every block that you modify must be processed by
pressing NC Start.
3
4
5
7
8
9
6FC5198-6AA60-0BP1
4 Machine
Stop point
6
Travel to end
4-41