Attaching The Light-Blocking Shield - Pioneer KRP-TS01 Operating Instructions Manual

Attaching the Light-blocking Shield

Conduct after attaching the Pioneer television
onto the stand.
This part prevents reflection of the cables connected to the
back of the Pioneer television on the base cover.
����
Attach it after anchoring the base cover on a flat stable place.
����
12
En
���������������������
�����
����������
In case of PDP-LX6090 / PDP-LX6090H /
PDP-LX609A (with side speakers installed)
Attachment Procedure
Peel off one side of the double-stick tape on the
light-blocking shield and attach the light-blocking
shield onto the base cover.
����
����
• Be careful that the light-blocking shield does not catch on
the pipe insertion holes.
• Anchor it in place so that there are no gaps. If there is a gap,
the light-blocking shield may peel off.
�����