Registering/Copying/Deleting A Layout - Panasonic PV500 User Manual

5.3.3 Registering/copying/deleting a Layout

Registering a Layout
An arranged display can be saved as a layout (up to 32 layouts). Saving it can switch layouts by a keypad
operation or a signal input from the external device.
Be sure to register the adjusted layout and save the setting data by following procedure after layout arranging.
If you switch to the other layouts or turn off the power of PV500 before registering the setting, the arranged
layout will be cleared.
1.
Select "LAYOUT" > "Layout" from the menu bar.
The layout setting window is displayed.
2.
Move the cursor onto the layout number to register.
3.
Press the F1 key to register the current layout.
If another layout has been registered in the selected layout
No., a confirmation message appears to overwrite. Select
"Yes" then.
Now you completed registering.
However, the layout information has not been saved in
PV500 yet.
Note that if turning off the power of PV500 without saving the
data in the storage space in PV500 in step 8, the arranged
layout will be deleted.
Press the F1, F2 or ENTER key while the cursor on the
layout number list to make the settings for layout. The
operation of each key is shown in the key guide. The
operation of each key is as below.
F1: Save Layout
F2: Select Preset
ENTER: Switch Layout
4.
Press the FUNC key and select "Enter Title" from the pop-up menu.
Enter a title with the software keyboard as necessary.
5.
Press the CANCEL key.
6
. Switch to SETUP menu.
7
. Select "SAVE/READ" -> "Save Setting Data".
8
. Save the data in the Storage Space in PV500 or a SD memory card.
Select "TOOL" > "Save Setting Data" to save data in RUN Menu.
326