Configuring Filters; Filter Settings - Siemens SINUMERIK 840D sl Operating Manual

See also
Overview of the program data (Page 9)
2.5

Configuring filters

2.5.1

Filter settings

You can influence the program list display using filter conditions and therefore restrict the
selection of visible directories/programs.
You have the option of using each column in the displayed program list as filter criterion.
The following options are offered depending on column type:
● Selecting or deselecting using a checkbox
● Detailed information
Filter processing
Save filter (Page 18)
Edit filters (Page 19)
Setting a classic filter (Page 20)
MCIS DNC - Direct Numerical Control
Siemens Automation Parts
Operating Manual, 09/2011, 6FC5398-7DP20-1BA0
3. Press the "OK" softkey to start the search.
The search starts from the current cursor position. The next hit is the
new cursor position. This means that the search can be continued from
the actual position - and if required can also be started from the
beginning again.
- OR -
Press the "Cancel" softkey to stop the search.
Overview of the program data
2.5 Configuring filters
15