Bosch GCY30-4 Operating/Safety Instructions Manual page 11

the power source before installation or removal of com-
munications module. Such preventive safety measures re-
duce the risk of starting the tool accidently.
A. Unlock the cover of con-
nectivity module 4 on the
power tool by turning it
counterclockwise
a screwdriver or a large
coin. Using unsuitable
objects can damage the
electronics or the cover.
B. Lift the cover of connec-
tivity module 4 and put it
aside.
C. Pull out the placeholder
3.
Note: Store the placeholder
3 of GCY30-4 at a safe
place. Insert the place-
holder again
ring the power tool without
GCY30-4 to a third party.
Assembly
Always remove the power tool bat-
tery or disconnect the plug from
with
when transfer-
A
4
B
3
C
11