Siemens Sinamics G120P Operating Instructions Manual page 43

Figure 3-7
For cabinet units without base section, the mounting bolts of the transport pallets must be
removed from the bottom of the pallet.
For cabinet units with base section, the mounting bolts of the transport pallet are accessible
only after the cover has been removed. They can then be loosened and removed directly
from the front.
Danger to life caused by the non-observance of restrictions concerning the weight and the
center of gravity
The non-observance of restrictions concerning the weight and the center of gravity can
cause death or severe injury during lifting and transport activities.
• The weight specified on the packaging and the designated center of gravity must always
• This potential hazard must be taken into account particularly once you have unscrewed
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
Transport pallet, position of the mounting bolts, example for cabinet unit with base
section
WARNING
be taken into account when the cabinet is lifted and transported.
the cabinet units from the transport pallet.
Mechanical installation
3.3 Assembly
43