Siemens SIPROTEC 5 Operation Manual page 124

Operation in the Operating State
8.4 Indications
[scgrflmd-191012-01, 1, en_US]
Figure 8-13
Reading on the Device through the On-Site Operation Panel
•
To reach the ground-fault log from the main menu, use the navigation keys of the on-site operation
panel.
Main Menu → Indications → Ground-fault indication
•
You can navigate within the displayed indication list using the navigation keys (up/down) on the on-site
operation panel.
[scgfllg1-191012-01.tif, 1, en_US]
Figure 8-14
Deletability
The ground-fault log of your SIPROTEC 5 device can be deleted. Read about it in chapter
Deleting the Logs.
Configurability
The indication scope of the ground-fault log is configured in a specifically defined column of the information
routing (matrix) of DIGSI 5:
Target → Log → Column Ground-fault log
124
Reading the Ground-Fault Log with DIGSI 5
Reading the Ground-Fault Log on the On-Site Operation Panel of the Device
8.4.6 Saving and
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016