5.3 BPL Signal Interface
5.3.1 Overall description
BPL transceiver is linked to a pair of BPL ports through:
-
a selectable High Frequency filter
-
a configurable splitter / combiner
BPL
transceiver
Note: BPL transceiver already has an HF filter covering the full band [1 – 34 MHz]
5.3.2 Selectable Filter
Depending on the configuration of the mother board (see Annex for details) two filter positions are available
for manual selection using the top panel switch.
Warning: positions 1 and 2 have been inverted on earlier production batches (those without the danger sign
on BPL port). In this document, please refer to the picture above and consider position 1 as front position and
position 2 as rear.
Proprietary – See Copyright Page
Selectable filter
17
BPL 1
Splitter /
BPL 2
Combiner
e-terrapowercom
v2 Installation Manual