WI-FI MODEM INSTALLATION
Air-to-Water Heat Pump Split type
1. Check if the indoor unit is turned off and the power of the outdoor
unit is turned off.
2. Open the front panel and the control box of the indoor unit.
3. Connect the USB cable to the indoor unit PCB (CN_WF).
4. Use an extension cable that reaches to the location where you
want to install the Wi-Fi modem.
5. Connect the Wi-Fi modem to the USB cable.
6. Attach the Wi-Fi modem to a wall or ceiling near the router.
(Use the included double-sided tape to fix it in place.)
14
CN_WF
Control Panel
USB Cable
Wi-Fi Modem
<Installation Example>
Indoor Unit PCB