Table of Contents
Advertisement
If you created a basic Access Point RLM configuration, as described in the
previous section, you may have already noticed the additional buttons in the
setup window, as pictured in
RLM Manager Wireless Interfaces tab (page
64).
The Frequency setup menu gives you the ability to select an operating
frequency from a range of sub-channels within the 2.4 GHz frequency band.
The number of selectable channels is determined by the radio regulations
that apply in your country.
Click the
button on the
tab of the edit
mode to change the frequency parameters.
To optimize network traffic, we recommend that you assign different
operating frequencies to Radio Link Modules that service neighboring
wireless cells. Doing so, stations in each of the cells will be able to use the
maximum bandwidth available to their cell.
Wireless stations equipped with PC cards CP 1515 can dynamically change
the operating channel when roaming between Access Point RLMs that
operate at different sub-channels.
192
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
Advertisement
Table of Contents
