Input Point Module (Afi5100); Product Description; Product Numbers; Prerequisites - Siemens AFI5100 Installation Manual

1

Input Point Module (AFI5100)

1.1

Product Description

1.2

Product Numbers

1.3

Prerequisites

Siemens Building Technologies
Fire Safety & Security Products
Fig. 1 Input Point Module
The AFI5100 is an Input Point Module used as part of a Siemens integrated access
control and security solution. It provides an interface between an Advanced Access
Controller (ACC) and up to 32 input devices used to monitor a secure facility.
The AFI5100 continuously monitors the status of all input devices connected; for
example, Passive Infrared Detectors (PIRs). Any changes in state are instantly
communicated to the ACC and then on to the Host system if necessary.
6FL7820-8CB10 AFI5100 – Input Point Module and base-plate
Input Devices to be connected to the IPM
Cabling (RS-485)
Required Tools & Materials
Medium-duty drill and associated drill-bits (if required)
4 mounting screws or standoffs (approx. 4mm)
Flat-blade terminal screwdriver
Wire cutters
Cable strippers
Input Point Module (AFI5100)
5
02.2005