Table of Contents
Advertisement
Starting and Shutting Down the System
18
Chapter 2 Introduction to Editing Operations
The logon screen appears.
The meanings of the fields in the logon screen are as following.
Username: The name registered when the EditStation is shipped from
the factory is "Administrator". If other user names have been
registered, the name of the user who used the system most recently
is displayed.
Password: Nothing is registered for this field when the EditStation is
shipped from the factory. If you have registered a password, enter it
in this field.
3
Enter your user name.
When you move the pointer to the user name field, its shape changes
from an arrow to a vertical line. When its shape changes, click the left
mouse button. The cursor in the user name field begins to blink to
indicate that you can enter your user name.
You do not need to carry out this step unless you have changed the
factory default assignment and wish to use a user name other than the
name displayed.
For more information about using the mouse, see page 20.
For more information about using the keyboard, see page 22.
4
Enter your password.
Move the pointer to the password field, click the left mouse button and
enter your password. The characters that you type are masked on the
screen, appearing as a row of asterisks (*****).
You do not need to carry out this step unless you have registered a
password. No password is registered when the EditStation is shipped
from the factory.
Advertisement
Table of Contents
