Advertisement
Safety precautions
English
This installation manual explains how to install a Multi Tenant Function Controller that is connects to indoor unit of Samsung
system air conditioner. Please read this manual thoroughly before installing the product. (Please refer to an appropriate
installation manual for any optional product installation.)
WARNING
Hazards or unsafe practices that may result in severe personal injury or death.
CAUTION
Hazards or unsafe practices that may result in minor personal injury or property damage.
Must follow directions.
Do NOT attempt.
Make sure the machine is grounded to prevent electric shock.
FOR INSTALLATION
Contact a service center for installation.
f Failure to do so may result in product malfunction, water leakage, electric shock and fire.
f
You must use the supplied wire for installation.
f Failure to do so may result in fire or damage to a Multi Tenant Function Controller.
f
All electric work should comply with local regulations and installation work carried out by a qualified technician.
f Installation by an unqualified technician may result in product malfunction, electric shock, and fire.
f
Check whether the installation work is performed in accordance with the installation instructions.
f Incorrect installation of a Multi Tenant Function Controller may result in electric shock or fire.
f
FOR INSTALLATION
When connecting a wire, do not tighten it too much.
f Failure to do so may result in breakage of the wire.
f
Make sure the Multi Tenant Function Controller installation doesn't cause interference with other electrical
appliances, particularly in a hospital etc.
f Failure to do so may result in abnormal operation.
f
Do not install the product in an area where combustible gas leaks or possible gas leakage is expected.
f Failure to do so may result in fire or explosion.
f
Do not install the product in conditions where it is exposed to oil, steam etc.
f Use of the product in an area exposed to oil, steam, sulfuric acid gas etc may result in component damage or
f
product malfunction.
Do not install the product in a place where acid or alkali liquid or special sprays are used.
f Failure to do so may result in electric shock or abnormal operation.
f
FOR OPERATION
Do not remodel or repair the Multi Tenant Function Controller yourself.
f Failure to do so may result in product malfunction, electric shock and fire, so contact a service center for repair.
f
When disposing of a Multi Tenant Function Controller, contact a service center.
Do not move or reinstall an installed Multi Tenant Function Controller yourself.
f Failure to do so may result in electric shock or fire.
f
FOR OPERATION
Make sure that water does not permeate inside the Multi Tenant Function Controller.
f Failure to do so may result in electric shock or fire.
f
Do not connect power cable to the control cable terminal.
f Failure to do so may result in fire.
f
2
보조전원 모듈_MCM-C210_IM_EN+FR_03929A-06.indd 2
WARNING
CAUTION
WARNING
CAUTION
Unplug the power plug from the wall socket.
Do NOT disassemble.
2016-04-21 오후 3:30:08
Advertisement
