C1.7 Bar Graph Page - Siemens FEC920 User Manual

C1.7 Bar Graph Page

The channels that have been
configured to be trended on the
FEC920 instrument will
automatically be displayed on this
page. The current configuration
data for those channels will be used
to render the values on the graph.
The graph will always use the
largest scale high and the lowest
scale low of all the channels being
rendered.
Click on a channel on the graph to
display the current channel status.
To remove this, click out of the
graph again. The channel status
will either be 'Ok' or 'Error' for all
other error conditions.
All channels will be represented in
their configured RGB colors. Color matching will very much depend on the display the browser is running on.
Options
The Options button allows the user some control over how the Bar Graph
page is displayed.
All data is stored as cookies.
Graph Type
Legend
Background Type
Gridlines
Decimal Places
Value Alignment
Plot Point
Appendix C
Page 224
FEC920: USER GUIDE
Gradient (as shown in the above display)
Flat
3D
Show or Hide the Channel numbering legend in
the top right hand corner
Transparent or White
Show or Hide
0 to 4
Horizontal or Vertical
All (shows all available channels)
Channel 1 only
Channel 2 only
Channel 3 only
Channel 4 only
A5E45696052A Rev-AA
September 18