Setting Up The Ucd Hunt Group - NEC Univerge UM8000 Installation Manual

UM8000
2.4
Installation Manual

Setting Up the UCD Hunt Group

1. Create a phantom extension number that will be the UCD pilot (master)
number.
Command Code:
First Data:
Second Data:
2. Link the UCD pilot number to the first digital voice messaging extension.
Command Code:
First Data:
Second Data:
3. Link the first digital voice messaging extension number to the second
digital voice messaging extension number, the second to the third, and so
on.
Command Code:
First Data:
Second Data:
NOTE
Repeat this command, chaining each voice messaging extension to the next
voice messaging extension. When you reach the last voice messaging
extension number, link it back to the UCD pilot extension number created in
Create a phantom extension number that will be the UCD pilot
(master) number. (page
11
xxx
Where <xxx> is an unused port
number.
xxx
Where <xxx> is the UCD pilot
extension
170
xxx
Where <xxx> is the UCD pilot
extension number.
xxx
Where <xxx> is the first digital voice
messaging extension number.
170
xxx
Where <xxx> is the first digital voice
messaging extension number.
xxx
Where <xxx> is the second digital
voice messaging extension number.
8-3).
Issue No. 1.0
8 - 3