Port Example 2; Port Suggested Action 2; Port Example 3; Port Suggested Action 3 - HP 3PAR StoreServ 7000 Troubleshooting Manual

Port Example 2

Component -Description- Qty
Port Missing SFPs
Component -Identifier- -Description--
Port port:0:3:1

Port Suggested Action 2

FC node-ports that normally contain SFPs will report an error if the SFP has been removed. The
condition can be checked using the showport -sfp command. In this example, the SFP in 0:3:1
has been removed from the adapter:
cli% showport -sfp
N:S:P -State- -Manufacturer- MaxSpeed(Gbps) TXDisable TXFault RXLoss DDM
0:0:1 OK
0:0:2 OK
0:3:1 -
0:3:2 OK

Port Example 3

Component -Description- Qty
Port Disabled SFPs
Component -Identifier- --Description--
Port port:3:5:1

Port Suggested Action 3

A node-port SFP will be disabled if the port has been placed offline using the controlport
offline command. Also see Example 4.
cli% showport -sfp
N:S:P -State- -Manufacturer- MaxSpeed(Gbps) TXDisable TXFault RXLoss DDM
3:5:1 OK
3:5:2 OK

Port Example 4

Component -Description- Qty
Port Offline ports
Component -Identifier- --Description--
Port

Port Suggested Action 4

Check the state of the port with showport. If a port is offline, it was deliberately put in that state
using the controlport offline command. Offline ports may be restored using controlport
rst.
cli% showport
N:S:P
3:5:1 target
44 Troubleshooting
1
SFP is missing
FINISAR_CORP.
FINISAR_CORP.
-
FINISAR_CORP.
1
SFP is disabled
FINISAR_CORP.
FINISAR_CORP.
1
port:3:5:1 is offline
Mode State ----Node_WWN---- -Port_WWN/HW_Addr-
offline 2FF70002AC00054C
2.1 No No
2.1 No No
- - -
2.1 No No
4.1 Yes No
4.1 No No
23510002AC00054C
No Yes
No Yes
- -
No Yes
No Yes
No Yes
Type
free