Sony SRS-ZR7 Operating Instructions page 2

Parts and controls When the indicator is lit or flashing
 (power) indicator
Indicator status (color) Unit status
Lights up (green) The unit is turned on.
Lights up (orange) The unit is in the BLUETOOTH/
network standby mode.
Lights off The unit is in the standby
mode.
Flashes (green) • When you turn on the unit,
the indicator flashes slowly
in green, and then lights up.
• When you touch the
VOLUME / buttons, the
indicator flashes once or
three times according to the
volume adjustment.
Flashes (red) A software update is failed, or
the unit is in the protect mode.
LINK indicator
Indicator status (color) Unit status
Lights up (orange) The unit is connected to a
Wi-Fi network.
Lights up (pink) The unit is connected to a
wired network.
Flashes (orange) The unit is in the process of
connecting to a Wi-Fi network.
Flashes (pink) The unit is in the process of
connecting to a wired network.
Flashes (red) The network connection failed.
Lights up (red) The network connection failed,
or connection failed even
though the network setting is
complete.
NETWORK indicator
Indicator status (color) Unit status
Lights up (white) The unit is in the NETWORK
mode.
The color of the lit/flashing indicator changes
depending on the connected music service. For
details, see the Help Guide.
UPDATE indicator
Indicator status (color) Unit status
Lights up (orange) The unit detects the latest
software while connected to
the Internet.
Flashes (orange) The unit is updating the
software. During the update,
you cannot operate the unit.
  (power)/ PAIRING button/indicator
 VOLUME / buttons
 FUNCTION button
 AUDIO IN indicator
 USB-B indicator
 USB-A indicator
 HDMI indicator
 BLUETOOTH indicator
 NETWORK indicator
 UPDATE indicator
 DTS indicator
 DOLBY D indicator
 L R indicators* 1
 LINK indicator
 N-Mark
 Grille detachment lever
 Screw hole for wall mounting*
2
 USB-A port (
A)
 AUDIO IN jack
 DC IN 19.5V jack
 STEREO PAIR button*
1
 LAN port
 SET UP button* 1
 HDMI ARC TO TV port
 USB-B port ( B)
 UPDATE/WPS button
* 1 This will be available after updating the software on
this unit. For details, see the Help Guide.
* 2 Use the holes to mount the unit on a wall. For
details, see the Help Guide.
When the indicator is lit or flashing
The color of the lit/flashing indicators indicates the
condition of the any settings. For details, see the
Help Guide.
To check the Wi-Fi signal strength (reception
sensitivity)
Touch/press and hold the VOLUME  button and
SET UP button. Depending on the signal strength,
indicators  to  will be lit. The number of
lighting indicators is relative to the signal strength.
If the signal is weak, no indicators will be lit. For
details, see the Help Guide.
Before operating the unit, please read this guide Compliance with FCC requirement 15.407(c)
thoroughly and retain it for future reference. Data transmission is always initiated by software,
which is the passed down through the MAC,
Owner's Record through the digital and analog baseband, and
finally to the RF chip. Several special packets are
The serial number is located on the bottom.
initiated by the MAC. These are the only ways the
Record the serial number in the space provided
digital baseband portion will turn on the RF
below. Refer to them whenever you call upon your
transmitter, which it then turns off at the end of
Sony dealer regarding this product.
the packet. Therefore, the transmitter will be on
Model No. SRS-ZR7
only while one of the aforementioned packets is
Serial No.
being transmitted. In other words, this unit
automatically discontinues transmission in case of
For customers in the USA
either absence of information to transmit or
Please register this product on line at http://
operational failure.
www.sony.com/productregistration
Frequency Tolerance: ±20ppm
Proper registration will enable us to send you
periodic updates about new products, services
5.15-5.35 GHz band is restricted to indoor
and other important announcements.
operations only.
Registering your product will also allow us to
Properly shielded and grounded cables and
contact you in the unlikely event that the
connectors must be used for connection to host
product needs adjustment or modification.
computers and/or peripherals in order to meet
Thank you.
FCC emission limits.
WARNING Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
To reduce the risk of fire or electric
3) Heed all warnings.
shock, do not expose this apparatus to 4) Follow all instructions.
5) Do not use this apparatus near water.
rain or moisture.
6) Clean only with dry cloth.
To reduce the risk of fire, do not cover the
7) Do not block any ventilation openings. Install in
ventilation opening of the appliance with
accordance with the manufacturer's
newspapers, tablecloths, curtains, etc.
instructions.
Do not expose the appliance to naked flame
8) Do not install near any heat sources such as
sources (for example, lighted candles).
radiators, heat registers, stoves, or other
Do not install the appliance in a confined space, apparatus (including amplifiers) that produce
such as a bookcase or built-in cabinet.
heat.
9) Do not defeat the safety purpose of the
The AC adaptor is not disconnected from the
polarized or grounding-type plug. A polarized
mains as long as it is connected to the AC outlet,
plug has two blades with one wider than the
even if the unit itself has been turned off.
other. A grounding type plug has two blades
As the main plug of AC adaptor is used to and a third grounding prong. The wide blade or
disconnect the AC adaptor from the mains, the third prong are provided for your safety. If
connect it to an easily accessible AC outlet. Should the provided plug does not fit into your outlet,
you notice an abnormality in it, disconnect it from consult an electrician for replacement of the
the AC outlet immediately. obsolete outlet.
10) Protect the power cord from being walked on
Please note that water doesn't splash, this product
or pinched particularly at plugs, convenience
is not waterproof specification.
receptacles, and the point where they exit from
To reduce the risk of fire or electric shock, do not
the apparatus.
expose this apparatus to dripping or splashing,
11) Only use attachments/accessories specified by
and do not place objects filled with liquids, such as
the manufacturer.
vases, on the apparatus.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold
CAUTION with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
The validity of the CE marking is restricted to only
combination to avoid injury from tip-over.
those countries where it is legally enforced, mainly
in the countries EEA (European Economic Area).
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
13) Unplug this apparatus during lightning storms
or when unused for long periods of time.
NOTE:
14) Refer all servicing to qualified service
This equipment has been tested and found to
personnel. Servicing is required when the
comply with the limits for a Class B digital device,
apparatus has been damaged in any way, such
pursuant to Part 15 of the FCC Rules. These limits
as power-supply cord or plug is damaged,
are designed to provide reasonable protection
liquid has been spilled or objects have fallen
against harmful interference in a residential
into the apparatus, the apparatus has been
installation. This equipment generates, uses and
exposed to rain or moisture, does not operate
can radiate radio frequency energy and, if not
normally, or has been dropped.
installed and used in accordance with the
instructions, may cause harmful interference to
For the state of California, USA only
radio communications. However, there is no
Perchlorate Material - special handling may
guarantee that interference will not occur in a
apply, See
particular installation. If this equipment does
www.dtsc.ca.gov/hazardouswaste/
cause harmful interference to radio or television
perchlorate
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
For customers in Canada
the following measures:
This unit complies with Industry Canada's
– Reorient or relocate the receiving antenna.
licence-exempt RSSs. Operation is subject to the
– Increase the separation between the equipment
following two conditions: (1) this unit may not
and receiver.
cause interference, and (2) this unit must accept
– Connect the equipment into an outlet on a circuit
any interference, including interference that may
different from that to which the receiver is
cause undesired operation of the unit.
connected.
– Consult the dealer or an experienced radio/TV High-power radars are allocated as primary users
technician for help. (i.e. priority users) of the bands 5250-5350 MHz
and 5650-5850 MHz and that these radars could
This equipment complies with FCC/IC radiation
cause interference and/or damage to LE-LAN
exposure limits set forth for an uncontrolled
devices.
environment and meets the FCC radio frequency
Outdoor use of the 5 GHz Wi-Fi function is
(RF) Exposure Guidelines and RSS-102 of the IC
radio frequency (RF) Exposure rules. prohibited by law.
This equipment should be installed and operated
Properly shielded and grounded cables and
keeping the radiator at least 20 cm or more away
connectors must be used for connection to host
from person's body.
computers and/or peripherals.
This unit complies with Part 15 of the FCC Rules
and Industry Canada's licence-exempt RSSs.
Troubleshooting
Operation is subject to the following two
conditions:
(1) This unit may not cause interference;
If a problem occurs while operating the unit, check
and
the following to resolve the problem before
(2) This unit must accept any interference,
consulting your nearest Sony dealer.
including interference that may cause undesired
• Check in the Help Guide.
operation of the unit.
http://rd1.sony.net/help/speaker/srs-zr7/h_zz/
This equipment must not be co-located or
operated in conjunction with any other antenna or
transmitter.
If you have any questions about this product, you
may call; Sony Customer Information Service
Center 1-800-222-7669 or
• Check information about the problem on the
http://www.sony.com customer support website.
For customers in the U.S.A.:
Declaration of Conformity
http://esupport.sony.com/US
For customers in Canada:
Trade Name: SONY
http://esupport.sony.com/CA/
Model No.: SRS-ZR7 • Disconnect the AC power cord from the unit, and
then connect it again.
Responsible Party: Sony Electronics Inc.
• Connect the unit to the HDMI ARC port on your
TV to listen to TV sound from this unit.
Address: 16535 Via Esprillo, San
If the problem persists after doing all of the above,
Diego, CA92127 USA
consult your nearest Sony dealer.
Telephone No.: 858-942-2230
and the HDMI Logo are trademarks or registered
Precautions
trademarks of HDMI Licensing LLC in the United
States and other countries.
• This system incorporates Dolby* Digital and the
On safety
DTS** Digital Surround System. This system
The nameplate and important information
incorporates Dolby* Digital.
concerning safety are located on the bottom
* Manufactured under license from Dolby
exterior of the main unit and on the surface of the
Laboratories. Dolby and the double-D symbol are
AC adaptor.
trademarks of Dolby Laboratories.
The MAC address is located on the bottom exterior
** For DTS patents, see http://patents.dts.com.
of this unit.
Manufactured under license from DTS, Inc. DTS, the
MAC1: MAC address of wired network
symbol & DTS and the Symbol together are
MAC2: MAC address of Wi-Fi network
registered trademarks, and DTS 2.0 Channel is a
• Before operating the unit, be sure that the
trademark of DTS, Inc. c DTS, Inc. All Rights
operating voltage of the unit is identical with
Reserved.
that of your local power supply.
• The BLUETOOTH® word mark and logos are
registered trademarks owned by the Bluetooth
Notes on the AC adaptor
SIG, Inc. and any use of such marks by Sony
Corporation is under license.
• When connecting or disconnecting the AC
• Google Play and Android are trademarks of
adaptor, turn off the unit beforehand. Otherwise,
Google Inc.
it may cause malfunction.
• Google Cast and the Google Cast Badge are
• Use only the supplied AC adaptor. To avoid
trademarks of Google Inc.
damaging the unit, do not use any other AC
adaptor. • "Xperia" and "Xperia Tablet" are trademarks of
Sony Mobile Communications AB.
• LDAC™ and LDAC logo are trademarks of Sony
Corporation.
• DLNA™, the DLNA Logo and DLNA CERTIFIED™
Polarity of the plug
are trademarks, service marks, or certification
• Plug the AC adaptor into a nearby AC outlet. In marks of the Digital Living Network Alliance.
the case of a problem, unplug it from the AC • This product incorporates Spotify software which
outlet immediately. is subject to 3rd party licenses found here:
• Do not install the AC adaptor in a confined space, https://developer.spotify.com/esdk-third-party-
such as a bookcase or built-in cabinet.
licenses/
• Spotify and Spotify logos are trademarks of the
The MAC address of Wi-Fi network is located on
Spotify Group.
the bottom exterior of this unit.
• The unit names and product names indicated in
• Before operating the unit, be sure that the
this document are generally the trademarks or
operating voltage of the unit is identical with
registered trademarks of the manufacturer.
that of your local power supply.
™ and ® marks are omitted in this document.
On placement
Notes on the License
• Do not set the unit in an inclined position.
This product contains software that Sony uses
• Do not leave the unit in a location near heat
under a licensing agreement with the owner of
sources, or in a place subject to direct sunlight,
its copyright. We are obligated to announce the
excessive dust, moisture, rain or mechanical
contents of the agreement to customers under
shock.
requirement by the owner of copyright for the
software.
On wall mounting
Please access the following URL and read the
• Have the installation done by a Sony dealer or
contents of the license.
licensed contractor and pay special attention to
http://rd1.sony.net/help/speaker/sl/16/
safety during the installation.
• Prepare the wall mount bracket (not supplied)
and screws (not supplied) that are suitable for
the wall material and strength when you mount
the unit on the wall. As a plasterboard wall is
especially fragile, attach the bracket and screws
securely in the wall beam. Install the speakers
horizontally, hung by screws in studs in a
Notice on GNU GPL/LGPL applied
continuous flat section of the wall.
software
• Keep enough space behind the unit when you
mount the unit on a wall, so that you can
This product contains software that is subject to
connect other devices to the unit. For details,
the following GNU General Public License
refer to the Help Guide.
(hereinafter referred to as "GPL") or GNU Lesser
• Sony shall not be held responsible for accidents
General Public License (hereinafter referred to
or damage caused by improper installation,
as "LGPL"). These establish that customers have
insufficient wall strength, improper screw
the right to acquire, modify, and redistribute the
installation or natural disaster, etc.
source code of said software in accordance with
the terms of the GPL or LGPL supplied. The
On operation
source code for the above-listed software is
available on the Web.
• Do not insert any small objects, etc., into the
jacks or ventilation hole on the rear of the unit. To download, please access the following URL
The unit may short out or malfunction. then select the model name "SRS-ZR7".
URL: http://oss.sony.net/Products/Linux/
Please note that Sony cannot answer or
On cleaning
respond to any inquiries regarding the content
• Do not use alcohol, benzine, or thinner to clean
of the source code.
the cabinet.
Notes on the update
Others
If you use this unit while connected to the
• If you have any questions or problems
Internet via a Wi-Fi network, the unit can update
concerning this unit that are not covered in this
to the latest software automatically.
document, please consult your nearest Sony
By updating the software, new features will be
dealer.
added enabling you to experience more
• When disposing of or giving away this unit, make
convenient and stable use.
sure to initialize it to reset all settings to the
If you do not want to automatically update the
factory defaults. For details, see the Help Guide.
software, you can disable this function by using
the SongPal installed on your smartphone/
iPhone.
On copyrights
However, the software may be updated
automatically for stable use, etc., even if you
• This product is protected by certain intellectual disable this function. Also, if you disable this
property rights of Microsoft Corporation. Use or function, you can still update the software
distribution of such technology outside of this manually.
product is prohibited without a license from For details about how to set and operate, refer
to the Help Guide.
Microsoft or an authorized Microsoft subsidiary.
The unit may not be operational while updating.
• Apple, the Apple logo, iPhone, iPod and iPod
touch are trademarks of Apple Inc., registered in
Disclaimer regarding services offered
the U.S. and other countries.
by third parties
App Store is a service mark of Apple Inc.,
registered in the U.S. and other countries.
Services offered by third parties may be
• Use of the Made for Apple badge means that an
changed, suspended, or terminated without
accessory has been designed to connect
prior notice. Sony does not bear any
specifically to the Apple product(s) identified in
responsibility in these sorts of situations.
the badge, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of this
device or its compliance with safety and
regulatory standards.
Please note that the use of this accessory with
an Apple product may affect wireless
performance.
• " " is a mark of the Wi-Fi Alliance.
• Wi-Fi®, Wi-Fi Protected Access® and Wi-Fi
Alliance® are registered marks of the Wi-Fi
Alliance.
• Wi-Fi CERTIFIED™, WPA™, WPA2™ and Wi-Fi
Protected Setup™ are marks of the Wi-Fi
Alliance.
• MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
• The N-Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United States
and in other countries.
• This unit incorporates High-Definition Multimedia
Interface (HDMI™) technology. The terms HDMI
and HDMI High-Definition Multimedia Interface,
Compatible iPhone/iPod models
Specifications
iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus,
iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s,
iPod touch (6th generation), iPod touch (5th
General
generation)
Power
Note
Power requirements
Sony cannot accept responsibility in the event that
DC 19.5 V (using the supplied AC adaptor connected to
data recorded to iPhone/iPod is lost or damaged
AC 100 V - 240 V, 50 Hz/60 Hz power supply)
when using your iPhone/iPod connected to this unit.
Power consumption
Design and specifications are subject to change
45 W
without notice.
Power consumption (during standby mode)
Less than 0.5 W
Power consumption (during BLUETOOTH/
network standby mode)
Less than 3 W
Dimensions (including projecting parts and
controls)
Approx. 300 mm × 93 mm × 86 mm (11 7/8 in × 3 3/4 in
× 3 1/2 in) (w/h/d)
Mass
Approx. 1.8 kg (4 lb)
Supplied accessories
AC power cord (1)
AC adaptor (1)
Operating Instructions, Warranty card (this document)
Warranty card (for customers in Canada) (1)
Section for USB port
USB A port ( A)
You can connect a USB flash drive or Walkman® that is
compatible with this unit.
Supported format*
MP3: 32/44.1/48 kHz, 16 - 320 kbps (CBR/VBR)
AAC: 16/22.05/24/32/44.1/48 kHz, 16 – 320 kbps (CBR/
VBR)
WMA: 32/44.1/48 kHz, 16 – 320 kbps (CBR/VBR)
WAV: 16/22.05/24/32/44.1/48/88.2/96/176.4/192 kHz
(16/24 bit)
AIFF: 32/44.1/48/88.2/96/176.4/192 kHz (16/24 bit)
FLAC: 16/22.05/24/32/44.1/48/88.2/96/176.4/192 kHz
(16/24 bit)
ALAC: 16/22.05/24/32/44.1/48/88.2/96/176.4/192 kHz
(16/24 bit)
DSD (DSF/DSDIFF): 2.8/5.6 MHz (1 bit)
Transfer speed
High-speed
Supported USB device
Mass Storage Class (MSC)
USB B port ( B)
You can connect a compatible device such as a PC,
etc., to this unit using a USB cable (not supplied).
Supported format* 4-451-230-21
PCM: 44.1/48/88.2/96/176.4/192 kHz (16/24/32bit)
DSD (DSF/DSDIFF): 2.8/5.6 MHz (1 bit)
* Compatibility with all encoding/writing software, recording
devices and recording media cannot be guaranteed.
Portable Audio
LIMITED WARRANTY
(U.S. Only)
Sony Electronics Inc. ("Sony") warrants this product against defects in material or workmanship for the time
periods and as set forth below when purchased directly from Sony or a Sony Retailer. Pursuant to this Limited
Warranty, Sony will, at its option, (i) repair the product using new or refurbished parts or (ii) replace the product
with a new or refurbished product. For purposes of this Limited Warranty, "refurbished" means a product or part
that has been returned to its original specifications. In the event of a defect, these are your exclusive rem-
edies.
Labor: For a period of one (1) year from the original date of purchase of the product ("Labor Warranty"), Sony
will, at its option, repair or replace with new or refurbished product, product determined to be defective. If Sony
elects to replace the product after this Labor Warranty has expired but while the Parts Warranty below is still in
effect, it will do so for the applicable labor charge.
Parts: For a period of one (1) year from the original date of purchase of product ("Parts Warranty"), Sony will
supply new or refurbished replacement parts in exchange for parts determined to be defective.
This Limited Warranty covers only the hardware components packaged with the Product. It does not cover
technical assistance for hardware or software usage and it does not cover any software products whether or not
contained in the Product; any such software is provided "AS IS" unless expressly provided for in any enclosed
software Limited Warranty. Please refer to the End User License Agreements included with the Product for your
rights and obligations with respect to the software.
Instructions: To obtain warranty service, you must deliver the product, freight prepaid, in either its original
packaging or packaging affording an equal degree of protection to the Sony authorized service facility specified.
It is your responsibility to backup any data, software or other materials you may have stored or pre-
served on your unit. It is likely that such data, software, or other materials will be lost or reformatted
during service and Sony will not be responsible for any such damage or loss. A dated purchase receipt
from Sony or a Sony Retailer is required. For specific instructions on how to obtain warranty service for your
product,
4-451-230-21
Visit Sony's Web Site:
www.sony.com/support
2015/07/24
Or call the Sony Customer Information Service Center
1-800-222-SONY (7669)
三鱗印刷
For an accessory or part not available from your authorized dealer, call:
1-800-488-SONY (7669)
Repair / Replacement Warranty: This Limited Warranty shall apply to any repair, replacement part or replace-
ment product for the remainder of the original Limited Warranty period or for ninety (90) days, whichever is
longer. Any parts or product replaced under this Limited Warranty will become the property of Sony.
This Limited Warranty only covers product issues caused by defects in material or workmanship during ordinary
consumer use; it does not cover product issues caused by any other reason, including but not limited to product
issues due to commercial use, acts of God, misuse, limitations of technology, or modification of or to any part of
the Sony product or product purchased from other than Sony or a Sony Retailer. To determine if a retailer is part
of the Sony Retailer Network, please contact Sony's Customer Service Call Center or go to www.sony.com/
support. This Limited Warranty does not cover Sony products sold AS IS or WITH ALL FAULTS or consumables
(such as fuses or batteries). This Limited Warranty is invalid if the factory-applied serial number has been altered
or removed from the product. This Limited Warranty is valid only in the United States.
LIMITATION ON DAMAGES: SONY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
DURATION OF IMPLIED WARRANTIES: EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations
on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This Limited
Warranty gives you specific legal rights and you may have other rights which vary from state to state.
4-557-145-04
4-451-230-21
Printed in China Printed in Japan D455714504