Advertisement
8
en | Installation
3.
4.
5.
2018.08 | 04 | F.01U.036.370
Connect the slip-on spade connectors on the control panel battery cable to the terminal
extender/splitters on battery A, observing polarity. An internal circuit breaker in the
control panel now protects the circuit for battery A.
Connect the D122 harness slip-on spade connectors (D122-P1 and D122-P2) to the
terminal extender/splitters on battery A, observing polarity.
Connect the battery harness slip-on spade connectors (P3 and P4) to the terminals on
battery B, observing polarity. The circuit breaker contained in the D122 harness now
protects the circuit for battery B.
Installation Instructions
Dual Battery Harnesses
Bosch Security Systems, Inc.
Advertisement
