Shutting Down The Power Forcibly; Terminating An Application And Reset - Hitachi Compute Rack 220H Getting Started Manual

Shutting down the power forcibly

The power may not be turned off even if you press the POWER switch when, for
example, the operating system (OS) is not working properly.
In this case, if you press the POWER switch continuously for four seconds or more,
you can forcibly turn off the system unit.
Do not perform this operation unless you cannot turn off the power with normal
procedure.
After you shut down the power forcibly, the OS or applications may not work
properly and integrity of the stored data may be compromised. If this situation
happens, set up the OS or applications again or restore the data from the backup
data.

Terminating an application and reset

If the system unit freezes while an application is running, you may recover the
system unit by terminating the application running on the operating system (OS)
forcibly or restarting (resetting) the OS forcibly. For details, see the manual of
the OS.
If you use Windows OS, see Hitachi Compute Rack 210H/220H Windows
Installation Guide.
After you terminate an application forcibly or resetting the OS, the OS or
applications may not work properly and integrity of the stored data may be
compromised. If this situation happens, set up the OS or applications again or
restore the data from the backup data.
Powering on/off system unit
Hitachi Compute Rack 220H Getting Started Guide
4-5