Page 1
00044A DVD-V7070/AFR-Eng1 3/21/03 2:29 PM Page 1 Instruction Manual OPEN/CLOSE POWER CHANNEL DVD-V7070 POWER OPEN/CLOSE SCREEN FIT SHUTTLE TV/VCR M O D E / REPEAT AUDIO ZOOM ANGLE 3D SOUND CLEAR EJECT TV MUTE INPUT SEL. 100+ SELECT VIEW DIGEST...
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this player is described on the rear panel of the player.
RETURN SPEED STEREO Insert Remote Control Batteries • Remove the battery cover by pushing down on the thumb tab and sliding the cover. • Insert two 1.5V “AA” batteries as shown, paying attention to the correct polarities (+/–). • When finished, slide the cover until it clicks back into place.
When Auto setting has been completed, the front panel displays the current time. If Auto Clock set is unable to find a channel to set the clock, you can set the clock manually; See page 18.
• Many discs will begin playback automatically when the disc DISC MENU drawer closes. • If the DVD has a disc menu, or more than one title, the disc menu may appear. Additional DVD Options • For advanced DVD Setup options, see pages 24~31.
• Also works in DVD and VCR mode. CH/TRK F.ADV/SKIP On-Screen Menu Navigation The on-screen menu system allows you to set all functions for your DVD-VCR. The following buttons are used to open and navigate MAIN MENU through the on-screen menu system.
00044A DVD-V7070/AFR-Eng2 3/21/03 2:30 PM Page 18 Manual Clock Set If Auto Setup was unable to find a local TV station to set the DVD- VCR’s internal clock, follow these instructions to set the date/time manually. DISC MENU NOTE: It is important to set the clock for accurate Timer Recording.
Move the selection bar to “Channel add/delete,” then press ENTER to select. Select Channel to add/delete Use the CH /❷ buttons to tune in the channel number you wish to add or remove. Select “CHANNEL ADD/DELETE” Press right to add or press left to remove the channel from your channel list.
Move the selection bar to “Option Setup”, then press right to select from following options: • Off – Auto power off is disabled. • 1Hr – DVD-VCR will auto shut off 1 hour after the last button is pressed. RF Output Channel •...
Subtitle Automatic Select “Disc Menu” Parental Unlocked Audio Options Move the selection bar to “Disc Menu,” then press ENTER to select. Display Options Set “Disc Menu Language” Preference RETURN ❷¤¤¤¤¤¤¤¤¤¤ ENTER Move the selection bar to your preferred language for DVD disc menus, then press ENTER to select.
MAIN MENU block playback of DVDs based on their content. The system uses an eight level rating system. Option Language • If you try to play a DVD that exceeds the selected rating, an error message will appear. Program Clock Channel Exit •...
• off - To use your DVD/TV with an A/V receiver NOT equipped ➛¤¤❿ off Dynamic Compression with a DTS decoder. • on – To use your DVD/TV with an A/V receiver equipped with a DTS decoder. RETURN ❷ Dynamic Compression Dynamic Compression constrains the dynamic range, i.e.
3/21/03 2:31 PM Page 30 TV Aspect Ratio Set the aspect ratio (length x width) of your TV screen so the DVD player will display movies at the appropriate size for your television. Choose from standard, letterbox, or widescreen format.
❿ • To resume playback, press the ll (Play/Pause) button. • If the player is left in Pause mode for 5 minutes, it will stop automatically. Frame Advance (Step) While in Still mode, press the F.ADV/SKIP button on the remote control to advance one frame at a time.
Screen Fit Playback SCREEN FIT Button During play, press SCREEN FIT button on the remote control. • Allows you to eliminate the black bars in the top and bottom of the screen when a movie is playing in the Widescreen format (16:9).
Zoom In Press the ENTER button repeatedly to zoom in at 2X - 4X - 2X - and normal magnification. Angle Some DVDs allow you to view the same scene from...
• “A-” will highlight when A-B Repeat is selected. SELECT VIEW NOTE: If you are playing a CD, the menu will display “Track” in place of “Chapter” Mark the Starting Point Press the ENTER button at the beginning of the segment you want to repeat (Point A).
00044A DVD-V7070/AFR-Eng3 3/21/03 2:33 PM Page 40 Bookmarks You can insert up to three Bookmarks on your DVDs, so you can jump quickly to your favorite scene or song. SETUP /ENTER Open Bookmark Menu During playback, press the MARK button on the remote control.
* If there are any gaps (blank data) on multi-session discs, you may experience playback problems. * On discs that are recorded with a Variable Bit Rate(VBR), e.g. from 32 to 320 kbps, the sound may cut in and out.
Move the selection arrow to “Auto Play,” then press right to select from the following options: • On - The VCR will automatically begin playing a video tape when it is inserted, as long as the safety tab of the cassette has been removed. • Off - Auto play is disabled.
While a cassette is stopped, press down arrow button. The VCR will fast forward, searching for a blank position, and then automatically stop at that position. If the VCR reaches the end of the tape during end search, the tape will be ejected. Basic Recording You can record a TV show in progress by inserting a blank tape and pressing the REC button.
• The DVD-VCR stops recording automatically when the time has elapsed. Record Speed You can slow down the recording speed from SP to SLP in order to fit six hours of programming on a T-120 tape. Start Recording Follow the Basic Recording instructions on page 47.
Page 50 How to Set a Timer Recording Insert a blank tape with a Record Safety Tab into the VCR deck. The Timer Recording Feature allows you to program up to 8 events at a time to record up to a month in advance.
Connect DVD-VCR to Stereo DVD & VCR Connect RCA cables from the Line Out Left & Right Audio jacks on the back panel of the DVD-VCR to the Auxiliary Inputs on your stereo receiver. If you are using a stereo television, connect the Video Output as well.
TV screen. Then press Record on the VCR deck. Timer Record From Device Select LINE1 (L1) or LINE2 (L2) as your record source in the Timer Record menu. All other Timer Record settings should be set in the usual manner.