Set Log Output Level (Informational); Set Log Output Level (Error); Set Log Console Output - Yamaha L2 Command Reference Manual

[Input mode]
global configuration mode
[Description]
Output the debug level log to SYSLOG. If this command is executed with the "no" syntax, the log is not output.
Since enabling debug level will output a large volume of log data, you should enable this only if necessary.
If you use the logging host command to send notifications to the SYSYLOG server, you should ensure that there is sufficient
disk space on the host. With the default setting, this is not output.
[Example]
Output the debug level log to SYSLOG.
SWR2311P(config)#logging trap debug

4.9.3 Set log output level (informational)

[Syntax]
logging trap informational
no logging trap informational
[Initial value]
logging trap informational
[Input mode]
global configuration mode
[Description]
Outputs the informational level log to SYSLOG.
If this command is executed with the "no" syntax, the log is not output.
[Note]
This can be output to the console by executing the logging stdout info command.
[Example]
Output the informational level log to SYSLOG.
SWR2311P(config)#logging trap informational

4.9.4 Set log output level (error)

[Syntax]
logging trap error
no logging trap error
[Initial value]
logging trap error
[Input mode]
global configuration mode
[Description]
Outputs the error level log to SYSLOG.
If this command is executed with the "no" syntax, the log is not output.
[Example]
Output the error level log to SYSLOG.
SWR2311P(config)#logging trap error

4.9.5 Set log console output

[Syntax]
logging stdout info
no logging stdout info
Command Reference | Maintenance and operation functions | 47