Installing The Ru On A Pole; Installing A Single Ru - Huawei DBS3900 Installation Manual

RRU3260
Installation Guide

8.2 Installing the RU on a Pole

One or more RUs can be installed on a pole.

8.2.1 Installing a Single RU

This section describes the procedure and precautions for installing a single RU on a pole.
Prerequisites
Before you install an RU on a pole secured on a tower, the RU and its mounting brackets are
hoisted onto the tower. For details, see
The hoist clamp on the main bracket is secured properly.


Procedure
Step 1 Determine a position for installing the mounting brackets.


Issue 05 (2014-06-30)
Do not stand the RU upright because the RF ports cannot support the weight of the RU.
Place a foam pad or cardboard under the RU to protect the RU housing from damage
during the installation.
If the pole must be installed on a tower, determine a position for installing the mounting
brackets according to the instructions in
If the pole must be installed on the ground, determine a position for installing the
mounting brackets according to
Figure 8-3 Distance between the mounting brackets and the ground
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7.1 Hoisting an RU onto a
3.5.1 Clearance for a Single
Figure 8-3.
8 Installing the RU
Tower.
RU.
48