Ipv6 Bgp Commands; Address-Family - Dell C9000 Series Reference Manual

Version
9.2(1.0)
7.8.1.0
7.7.1.0
7.6.1.0
Example
Dell# show running-config extcommunity-list test
ip extcommunity-list test
Dell#

IPv6 BGP Commands

IPv6 border gateway protocol (IPv6 BGP) is an external gateway protocol that transmits interdomain routing
information with extended IP address space within and between Autonomous Systems (AS).
Basically, two routers (called neighbors or peers) exchange information including full routing tables and
periodically send messages to update those routing tables.

address-family

Enable the IPv4 multicast or the IPv6 address family.
C9000 Series
Syntax
address-family [ipv4 multicast| ipv6unicast]
Parameters
ipv4multicast
ipv6unicast
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version
9.9(0.0)
9.2(1.0)
Description
Introduced on the Z9500.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
permit rt 65033:200
deny soo 101.11.11.2:23
permit rt as4 110212:340
deny regex ^(65001_)$
Enter BGPv4 multicast mode.
Enter BGPv6 mode.
Description
Introduced on the C9010.
Introduced on the Z9500.
Border Gateway Protocol 561