cam-ipv6-max-/65-to-/128-Prefix : 2048
Dell(conf)#
show ipv6 cam linecard
Display the IPv6 CAM entries for the specified line card.
C9000 Series
Syntax
show ipv6 cam linecard slot id port-set number [vrf vrf-name]
[X:X:X:X::X | summary]
Parameters
slot-id
port-set
vrf vrf-name
X:X:X:X::X
summary
Defaults
none
Command Modes
EXEC
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.0.0.0
8.3.19.0
8.3.7.1
Displays the cam entries for the mentioned linecard id.
Enter the keyword port-set and specify the port-set number.
The port-set number value is 0.
(OPTIONAL) Enter the keyword vrf followed and the name of
the VRF to display IPv6 CAM entries corresponding to that VRF.
NOTE:
If you do not specify this option, IPv6 CAM entries
corresponding to the default VRF are displayed.
(OPTIONAL) Enter the network address or host name.
(OPTIONAL) Enter the keyword summary to display a table
listing network prefixes and the total number prefixes which can
be entered into the IPv6 CAM.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
IPv6 Basics
1286