Confirming Status In The [Home Network] App Home Screen; Device Led Indicators - Panasonic KX-HNB600 User Manual

Another user is using the device
Hub is busy
Hub's date and time setting was corrected after a power outage
Device was registered to the hub
Arm mode was changed
Entry delay countdown in effect
Outdoor camera is too cold
*1 You can disable these icons from being displayed in your mobile device's status bar, if desired
( "[Connection Status Icon] (Android devices only)", Page 98).

Confirming status in the [Home Network] app home screen

The system can provide information about system status by displaying animations and messages in the
[Home Network] app home screen. The icons shown below are animated in the following situations.

Device LED indicators

The system can provide information about the status of each device by turning on the device's LED
indicator.
Meaning of symbols used in this section
Indicator off
Indicator lit
Indicator blinking slowly
Indicator blinking
Camera audio and video are being recorded, indoor camera sound sensor
was triggered, or indoor camera temperature sensor was triggered
Standalone sensor (window/door sensor, motion sensor, etc.) or camera
motion sensor was triggered
Smart plug overcurrent or overwattage sensor was triggered, or the smart
plug could not turn on or off properly
Using the app
39