Connecting The Battery Cable; Connecting The 230 V Ac Single-Phase Of Tn 400 V Net Or Tt 400 V Net Input Power Cable - Huawei ETP4830-A1 User Manual

ETP4830-A1 Embedded Power
User Manual
Figure 4-10 Connecting the load cable
----End

4.3.5 Connecting the Battery Cable

The following figure shows the wiring terminal for the battery cable. The battery cable is
installed in the same way as a load cable. For details, see
Cable.
Figure 4-11 Battery wiring terminal
(1) Battery wiring terminal
4.3.6 Connecting the 230 V AC Single-Phase of TN 400 V Net or
TT 400 V Net Input Power Cable
Procedure
Step 1 Remove the protective cover over AC input terminals.
Step 2 Connect the neutral wire (an M4 OT terminal is used for the cable) to the wiring terminal
marked as N.
Step 3 Connect the live wire (an M4 OT terminal is used for the cable) to the wiring terminal marked
as L.
Issue 10 (2017-08-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Installation
4.3.4 Connecting the DC Load
28