Sony LKRA-009 Installation Manual page 37

Main projector
(1) Disconnect the harness from the connector (CN003) on the SU-165 board, then connect it to the
connector (B) of the tamper harness.
(2) Remove the screw from the SU-165 board.
(3) Connect the connector (C) of the tamper harness to the connector (CN003) on the SU-165 board.
(4) Attach the ground wire of the tamper harness with the screw removed in step (2).
Main projector
Sub-projector
(1) Disconnect the harness from the connector (CN003) on the SU-165 board, then connect it to the
connector (B) of the tamper harness 1.
(2) Connect the tamper harness 2 to the connector (CN003) on the SU-165 board.
Sub-projector
Digital Cinema Dual System
SU-165 board
CN003
PSW
4 x 10
Harness
To the connector (three terminals) of the tamper harness
of conduit (To the sub-projector side)
SU-165 board
CN003
Harness
Connector (C)
Connector (A)
(three terminals)
SU-165 board
CN003
Tamper harness 2
Harness
Connector (B)
To the connector (two terminals)
of the tamper harness of conduit
(To the main projector side)
Connector (A)
Tamper harness 1
SU-165 board
CN003
Ground wire
PSW
4 x 10
Harness
Connector (B)
Tamper harness
2-17 (E)