Transmission From An Sd Memory Card To The Execution Memory - Panasonic AFP7PSA1 User Manual

Operation

5.4.5 Transmission from an SD Memory Card to the Execution Memory

Insert an SD memory card, and set the mode switch to "COPY", in order to transmit a project
saved in the SD memory card to ROM1 and write it in as an execution project.
 Switch setting conditions
Switch
Mode switch
Card operation switch
 When power is OFF
1. Attach an SD memory card that houses the auto execution file "autoexec.fp7" and the
comment file "comment.fp7" for a project to the CPU unit.
2. Close the cover and power on the unit.
3. Until "COPY LED" flashes (approx. 5 seconds), set the RUN/PROG./COPY switch to
"COPY".
Transmission of project data is started. Once "COPY LED" starts to flash, the
transmission process continues if you let go off the COPY switch. Once transmission
is completed, "COPY LED" turns off.
5-14
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Setting
OFF
RUNCOPY PROG.COPY
CARD
ROMCARD
ON