Safety-Related Operator Controls; Emergency Stop Button - Siemens F IWLAN Operating Instructions Manual

Operator controls and displays

5.4 Safety-related operator controls

Power management for the HMI device provides the following operating modes:
Operating
mode
OFF
ON
"Power Save 1" "PWR" lights up.
"Power Save 2" "PWR" flashes.
See also
Setting the screen saver (Page 127)
5.4 Safety-related operator controls
5.4.1

EMERGENCY STOP button

The EMERGENCY STOP button is designed with 2-channels and enables an EMERGENCY
STOP of the plant unit with which safety-related communication is taking place. The
EMERGENCY STOP button satisfies the requirements specified in DIN IEC 60947-5-5,1997
Annex K. You can find additional information in the section "Safety functions of the
EMERGENCY STOP button (Page 41)".
Due to its position, the EMERGENCY STOP button is equally accessible for both left-handed
and right-handed persons.
88
LED
"PWR" is off.
"BAT" is off.
"PWR" lights up.
The brightness of the
touch screen is reduced.
The touch screen is
switched off.
Action
Briefly press Taste "ON/OFF"
Automatically, if no actions are
performed within a configured
time period.
Briefly press Taste "ON/OFF"
Press Taste "ON/OFF" for at
least 4 seconds.
Operation on the touch screen
Briefly press Taste "ON/OFF"
Automatically, after a configured
time interval if no operations are
carried out
Press Taste "ON/OFF" for at
least 4 seconds.
Briefly press Taste "ON/OFF"
Briefly press Taste "ON/OFF"
and then press it for at least
4 seconds.
Wireless Teach Pendant F IWLAN V2
Operating Instructions, 08/2010, A5E02453837-01
PRELIMINARY II
1.7.2010
Follow-up operating
mode
ON
"Power Save 1"
"Power Save 2"
OFF
ON
"Power Save 2"
"Power Save 2"
OFF
ON
OFF