Figure 3-1 Static Electricity Guard (2/2) - NEC Neax 2000 IVS System Manual

INSTALLATION
•
WHEN SETTING SWITCHES ON A CIRCUIT CARD
•
WHEN CARRYING A CIRCUIT CARD
The mark shown below is attached to the sheet for the work in which circuit cards are handled. When engaging
in such work, the installer must perform the work while paying attention to the damage caused by static
electricity.
CHAPTER 3
Page 14
Revision 1.0
CIRCUIT
CARD
CIRCUIT
CARD

Figure 3-1 Static Electricity Guard (2/2)

ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
ND-45895 (E)
WEAR A WRIST STRAP AND PERFORM
THE WORK ON A GROUNDED
CONDUCTIVE WORK SURFACE.
CONDUCTIVE
POLYETHYLENE
BAG
WHEN CARRYING A CIRCUIT
CARD AROUND, KEEP THE
CARD IN THE CONDUCTIVE
POLYETHYLENE BAG.