Accessory Information - Panasonic KX-HNC600 Installation Manual

Accessory information

Supplied accessories
No. Accessory item/Part number
A AC adaptor/PNLV236-0Y
B Camera mounting stand/PNZB1002Z
C Wall mounting screws (25 mm (1 inch))/XTB4+25AVW
D Suspension wire tool
– Safety wire: 1
PQME10080Z
– Washers: 2
Small washer for attaching safety wire to camera
ø12 mm (15/32 inches)/XWG26D12VW
Large washer for attaching safety wire to wall
ø16 mm (5/8 inches)/XWG4F16VW
– Screws: 2
Small screw for attaching safety wire to camera
10 mm (3/8 inches)/XTB26+10GVW
Large screw for attaching safety wire to wall
25 mm (1 inch)/XTB4+25AVW
E Sensor range cap/PNHG1210Z
A B
Additional accessories
Please contact your nearest Panasonic dealer for sales information.
Accessory item
*1
DC extension cord
*1 Designed for indoor use only. Do not use outdoors.
Other information
R Design and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product.
For assistance, please visit http://shop.panasonic.com/support
HNC600_(en_en)_0123_ver.201.pdf
C
3
Introduction
Quantity
D E
Order number
PNJA1159Z
1
1
4
1
1
3
2017/01/26 9:24:42