Installation; Unpacking; Package Contents - Bosch DIVAR 2000 Operation Manuals

DIVAR 2000 / DIVAR 3000 / DIVAR
5000
4

Installation

Notice!
Use proper surge suppression on cables that are routed outdoors, or close to large inductive
loads or electrical mains supply cables.
Caution!
! Installation should only be performed by qualified service personnel in accordance with the
National Electrical Code (NEC 800 CEC Section 60) or applicable local codes.
To get the unit operational, perform the following quick install steps:
1. Carefully unpack the recorder from its shipping packaging – see Unpacking.
2. Make all required hardware connections – see 'Make Connections'.
3. Power up the system – see Powering Up.
4. Log in – see Login.
5. Correctly configure your system software with the Startup wizard (this appears the first
time the unit is started) – see Startup Wizard.
After completing this initial setup, the system is ready to run and will show a live view of the
camera image(s). If required, you can alter the settings later using the menus and/or factory
defaults, or you can run the Startup wizard again.
4.1

Unpacking

This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all parts are included. If any items are missing, notify your Bosch Security Systems
Sales or Customer Service Representative.
The original packaging is the safest container in which to transport the unit and can be used if
returning the unit for service.
4.1.1

Package contents

Qty
1
1
2
1
1
1
1
1
1
Bosch Security Systems
Component
Recorder
Optical disc containing software licenses and user documentation
Power supply cables (120VAC US type; 230VAC Euro type)
External power supply adapter (only for DIVAR 2000/3000 network (non-PoE)
models and DIVAR 3000 hybrid models)
Terminal connector blocks
19" mounting set including brackets and screws (only on DIVAR 5000 models)
Hard disk mounting kit (including SATA cables, brackets and screws)
Optical USB mouse
IR remote Control with 2 AA (1.5 V) batteries
Ground screw
Operation Manual
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Installation | en 11
2016.09 | v1.0 | AM18-Q0717