Table of Contents
Advertisement
When the temperature inside the infotain-
ment system is too high, loading and play-
back of CDs is disabled.
Inserting or removing a memory card
First read and observe the safety warn-
ings
on page 3 and the introductory
information on page 20.
Inserting a memory card
Fig. 1
7
Vertical card slot
Horizontal card slot
If a memory card cannot be inserted, ensure that it
is positioned correctly and is compatible with the
unit.
Playback starts automatically if supported audio
files are stored on the memory card.
Removing a memory card
The inserted memory card must be prepared for
removal.
● In the MEDIA main menu touch the
button to open the
Media setup
● OR: press the
infotainment button.
SETUP
● Touch the
Remove the SD card safely
ton.
● OR: touch the
Remove safely
then select
.
SD card
External data storage device connected to USB port
First read and observe the safety warn-
ings
on page 3 and the introductory
information on page 20.
In some countries and with some equipment lev-
els, the vehicle may be fitted with a USB connec-
tion in the stowage compartment in the centre
console. ⇒ B ooklet Owner's Manual, chapter Prac-
tical equipment.
Only supported audio files are displayed and
played. Other files are ignored.
Playback starts automatically if supported audio
files are stored on the data storage device.
26
Composition Touch, Composition Colour
ery time, contact a qualified workshop.
Only supported audio files are displayed and
played. Other files are ignored.
Insert a compatible memory card into the memory card slot with the cut-off
corner first and the lettering facing left (contact surfaces facing down) until
the card clicks into place.
Insert a compatible memory card into the memory card slot with the cut-off
corner first and the label facing up (contact surfaces facing down) until the
card clicks into place.
Once the memory card has been ejected from the
system, a message is shown on the screen and
the function button is greyed out. The memory card
can then be removed.
● Press the inserted memory card. The memory
card springs out of the slot.
● Remove the memory card.
Memory card cannot be read
If you insert a memory card containing data that
function
cannot be read, the unit will not change to memory
menu.
card mode after loading.
A corresponding message is displayed.
function but-
function button and
Removing
The connected storage device must be prepared
before removal.
● In the MEDIA main menu, touch the
button to open the
● OR: press the
● Touch the
then select
Data media cannot be read
The message
appears if the data on the connected storage de-
vice cannot be read.
If you insert a number of different CDs and
receive the message
Error: CD drive
Media setup
infotainment button.
SETUP
function button and
Remove safely
.
USB
No playable files available
ev-
function
menu.
Advertisement
Table of Contents
