4.4.3 GE Connect™ tab
GE WattStation Connect™ is largely setup and ready to go at the factory. However, there are a
few configurable items to consider when setting up your WattStation.
Standalone Operation From WattStation Connect
•
This option, if checked, gives WattStation owners the ability to make their WattStation
operable even the GE WattStation Connect connection is down.
Station Latitude and Longitude
•
These settings allow GE WattStation Connect™ to know where your WattStation is located
so it can be properly located on the map.
Proxy URL and Port
•
These settings may be required if your network administrator requires a Proxy server to be
used to gain access to the Internet.
Timezone Offset
•
This setting provides the offset, in minutes, from Greenwich Mean Time (GMT) of the time
zone your WattStation is located in. Eastern Time (USA) is -300 (5 hours behind GMT).
© GE All Rights Reserved
28