Module Installation - GE GCG001 Quick Start Manual

2.4. Module Installation

The GCG001 is designed to mount over the expansion slot of an RX3i Universal Backplane. It
may alternately be mounted directly on a panel. In both cases, at least 75 mm (3 in.) must
remain clear above and below the module to allow for convection cooling.
Backplane Mounting
The two captive M3.5 screws at the rear of the GCG001 align with mating tapped holes on
the right side of the Universal Backplane (above and below the expansion connector),
providing a convenient mounting location.
Note: External power must be supplied to the module —it does not draw power from
the RX3i Universal Backplane.
GFK-2891C 9