System Administration; Configuring The System Name And Location - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide

System Administration

This chapter describes how to perform various administrative tasks related to device identification, user
permissions, alarm configuration, certificates and keys, and more. It describes the following tasks:
• Section 4.1, "Configuring the System Name and Location"
• Section 4.2, "Configuring the Hostname"
• Section 4.3, "Customizing the Welcome Screen"
• Section 4.4, "Setting the User Authentication Mode"
• Section 4.5, "Setting the Maximum Number of Sessions"
• Section 4.6, "Managing Alarms"
• Section 4.7, "Managing Certificates and Keys"
• Section 4.8, "Managing RADIUS Authentication"
• Section 4.9, "Managing Users"
• Section 4.10, "Managing Passwords and Passphrases"
• Section 4.11, "Scheduling Jobs"
Section 4.1

Configuring the System Name and Location

To configure the system name and location of the device, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to admin. The Administration form appears.
Figure 196: Administration Form
1. System Name Box
Configuring the System Name and Location
1
2
3
2. Location Box 3. Contact Box
Chapter 4
System Administration
185