Normal Startup Sequence; Figure 51: Normal Startup Sequence - Canon imagePRESS A3200 Installation And Service Manual

T
ROUBLESHOOTING

Normal startup sequence

When you power on or reboot the imagePRESS Server, the system runs the following startup
routine on the Control Panel. It takes approximately two minutes for the imagePRESS Server
to complete the startup routine and reach Idle.
N :
OTE
may be slightly different.
The imagePRESS Server
1
is powered on.
Activity light
is solid amber
No backlight
Power on
Server software on
4
the HDD completes
startup routine.
Activity light
is off
imagePRESS
Server
1 minute,
45 seconds
F
IGURE
The following figure is approximate. The screens, times, and sequences you observe
Code in motherboard
2
BIOS initializes and
configures areas on
the motherboard.
imagePRESS
Server
15 seconds
The imagePRESS Server
5
reaches Idle.
imagePRESS
Server
2 minutes
51: Normal startup sequence
3
Activity light
flashes amber
imagePRESS
1 minute,
15 seconds
Activity light
is off
Windows operating
system starts up.
Activity light
flashes green
Server
148