Download
Share
Print this page
D-Link DIR-130 How To Set Up
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Network Router
  5. DIR-130 - Broadband VPN Router
  6. How to set up
D-Link DIR-130 How To Set Up

D-Link DIR-130 How To Set Up

How to setup an ipsec vpn connection between a d-link dir-130 and di-80xhv
Hide thumbs Also See for DIR-130:

Advertisement

Quick Links

Download this manual See also: Troubleshooting Manual, User Manual
How to setup an IPSec VPN connection between a DIR-130 and DI-80xHV
This setup example uses the following network settings:
In our example the IPSec VPN tunnel is established between two LANs: 192.168.0.x and
192.168.1.x.
NOTE: It is essential to have private networks (LAN 1 and LAN 2) on different subnets.
D-Link Technical
Support – How to setup an IPSec VPN connection between a DIR-130 and DI-80xHV
Page 1 of 10

Advertisement

loading

Related Manuals for D-Link DIR-130

Summary of Contents for D-Link DIR-130

  • Page 1 In our example the IPSec VPN tunnel is established between two LANs: 192.168.0.x and 192.168.1.x. NOTE: It is essential to have private networks (LAN 1 and LAN 2) on different subnets. D-Link Technical Support – How to setup an IPSec VPN connection between a DIR-130 and DI-80xHV Page 1 of 10...
  • Page 2 Configuration of the DIR-130 Step 1. Log into the DIR-130 by opening Internet Explorer and typing the LAN address of the device. In our example we are using the default 192.168.0.1. Enter Username and Password which you specified during the initial setup of the Firewall.

  • Page 3: Ipsec Setting

    • IKE Proposal List: leave at default (3DES, SHA1) PHASE 2 • IPSec Proposal List: leave at default (3DES, SHA1) Click Save Settings. D-Link Technical Support – How to setup an IPSec VPN connection between a DIR-130 and DI-80xHV Page 3 of 10...
  • Page 4 D-Link Technical Support – How to setup an IPSec VPN connection between a DIR-130 and DI-80xHV Page 4 of 10...
  • Page 5 ID 1 • Tunnel Name: enter a name of the VPN • Method: select IKE Click Apply to save the settings. D-Link Technical Support – How to setup an IPSec VPN connection between a DIR-130 and DI-80xHV Page 5 of 10...
  • Page 6 IPSec NAT Traversal: check to enable • Auto-reconnect: check to enable Click Apply to save the settings and click Continue when prompted. D-Link Technical Support – How to setup an IPSec VPN connection between a DIR-130 and DI-80xHV Page 6 of 10...
  • Page 7 Proposal ID: select 1 and click on Add To to add to the IKE Proposal index Click Apply and then click Back. D-Link Technical Support – How to setup an IPSec VPN connection between a DIR-130 and DI-80xHV Page 7 of 10...
  • Page 8 Proposal ID: select 1 and click on Add To to add to the IPSec Proposal index Click Apply and then click Continue when prompted. D-Link Technical Support – How to setup an IPSec VPN connection between a DIR-130 and DI-80xHV Page 8 of 10...
  • Page 9 If the tunnel has not been established, click on the Refresh button or ping to an IP address on the remote side. When replies are sent back, the tunnel has been established. D-Link Technical Support – How to setup an IPSec VPN connection between a DIR-130 and DI-80xHV Page 9 of 10...
  • Page 10 NetBIOS over TCP/IP in Windows. Note that firewall/antivirus software installed on your or remote computer may stop you from accessing remote network. D-Link Technical Support – How to setup an IPSec VPN connection between a DIR-130 and DI-80xHV Page 10 of 10...