Set Web-Console Function - Hitachi Compute Blade 500 Series User Manual

Example
[To display whether use of the Web console is enabled.]
$ show web-console function
-- Web console functionality --
Web console (mgmt-lan)
Web console (mnt-lan)
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None

set web-console function

Command
set web-console function [-mg <function>] [-mn <function>] [-F]
Description
Specifies whether to enable use of the Web console.
Set the following items:
• Whether to enable use of the Web console from the management LAN
• Whether to enable use of the Web console from the maintenance LAN
Whether to enable use of the Web console from the management LAN
Set whether to enable use of the Web console when the system console is
connected to management LAN port 0 (MGMT0) or management LAN port
1 (MGMT1) for management modules.
Whether to enable use of the Web console from the maintenance LAN
Set whether to enable use of the Web console when the system console is
connected to the maintenance LAN port (MAINT) for management
modules.
Role
Chassis
Parameters
-mg <function>
Specifies whether to enable use of the Web console from the
management LAN.
enable : Enabled.
disable : Disabled.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
: enable
: enable
2-319