Fujitsu Arrows NX F-01J Instruction Manual page 44

❖
Numeric keypad input
You can use the following 4 input methods in the numeric
keypad.
･
Select the input method you want to use in [Numeric
keypad].→P43
■ Flick input
If you touch and hold the key assigned the character you want
to enter, characters (flick guide) will be displayed on that key.
Flick towards the desired character without releasing your
finger from the screen.
･
To enter voiced/semi-voiced sound/small/geminate
consonant characters, tap
■ Numeric keypad input
Tap continuously a key assigned the character you want to
enter until the desired character is displayed.
･
To enter voiced/semi-voiced sound/small/geminate
consonant characters, tap
■ Gesture input
If you touch and hold the key assigned the character you want
to enter, characters (gesture guide) will be displayed around
that key. Slide your finger to the desired character without
releasing your finger from the screen.
･
To enter voiced/semi-voiced sound/small/geminate
consonant characters, slide down once or twice without
releasing your finger from a key. Gesture guide for voiced/
semi-voiced sound/small/geminate consonant characters
around the key appears. Slide your finger to the desired
character without releasing.
once or twice after flicking.
once or twice after tapping.
Example: Entering "ぱ"
･
In the alphanumeric input mode, you can switch between
uppercase and lowercase characters by sliding downwards
without releasing your finger from the screen.
■ 2-touch input
Tap a key assigned a character you want to enter first, then tap
a desired character.
42
Before using the terminal