Calibrating With Colorwise Pro Tools And Dtp41 - Canon ColorPASS-Z5000 Color Manual

3
3-16 Color Calibration

Calibrating with ColorWise Pro Tools and DTP41

Using ColorWise Pro Tools' Calibrator application and the DTP41
spectrophotometer, you can quickly measure color patches generated by the copier and
automatically download these measurements to the ColorPASS.
Changing the calibration has the potential to affect all jobs for all users, so you may
want to limit the number of people authorized to perform calibration. An
Administrator password can be set from the ColorPASS Control Panel to control
access to calibration.
Multiple users can be connected to one ColorPASS server with ColorWise Pro Tools,
but only one user at a time can use the Calibrator module. An error message appears if
you try to calibrate when another user is already using ColorWise Pro Tools to
calibrate.
Before using ColorWise Pro Tools and the DTP41 to calibrate the ColorPASS,
N :
OTE
follow the instructions on page 3-27 for calibrating the DTP41 spectrophotometer.
T C PASS
O CALIBRATE THE OLOR
1. Launch ColorWise Pro Tools and connect to the ColorPASS.
For instructions on configuring the connection to the ColorPASS, see Getting Started.
If the connection to the ColorPASS from Command WorkStation that also
N :
OTE
allows for access to ColorWise Pro Tools is not established, you can directly launch
ColorWise Pro Tools independently of Command WorkStation.
DTP41:
USING THE