Scanner Heating Cable - Samsung CLX-9350ND Service Manual

3.4.11 Scanner heating cable

Perform the following procedure to remove the Scanne
1. Remove the Scan glass. (refer to 3.4.1)
2. Remove the align cover [A] after removing 4 screws. 2 Remove the align cover [A] after removing 4 screws
3. Assemble the Heater-a[B] and Scan_heater2 harnes
Heater-a
[C]
[D]
Connect [C], [D] as shown [ ], [ ]
above.
Service Manual
CLX-9250/9350 series
3. Replacemen nt Procedures
r Heating cable from the Scan Unit.
[A]
ss in the below order.
[C]
[D]
[F]
<Scan_h <Scan h heater2 harness> heater2 harness>
Fix the black wire wit th the
clamp.
3-2 23
[E]
[G] [G]
[E]
Connect [E] as shown [ ]
above.
SAMSUNG ELECTRONICS
CAUTION
Observe precautions
For handling
Electrostatic Electrostatic
Sensitive
Devices