Figure 2.4 Separating The Case - Samsung SMT-R2000 User Manual

SMT-R2000 Service Manual
Hold on the ends of the case in the direction of the longer sides and pull out the case in
the opposite directions each other, to separate the case. The figure below shows an
example that the case is separated:

Figure 2.4 Separating the Case

3) Separating the Main Board and Bottom Case
Remove three screws fixing the main board and bottom case:
Figure 2.5 Removing Screws
Separate the antenna connector from the main board:
Figure 2.6 Separating the Main Board and Bottom Case
© SAMSUNG Electronics Co., Ltd. 2-3