ABB ACS355 series User Manual page 308

308 Actual signals and parameters
All parameters
No. Name/Value
POLSKI
TÜRKÇE
CZECH
MAGYAR
ELLINIKA
CHINESE
KOREAN
JAPANESE
9902 APPLIC
MACRO
ABB
STANDARD
3-WIRE
ALTERNATE
MOTOR POT
HAND/AUTO
PID CONTROL PID control. For applications in which the drive controls a
TORQUE
CTRL
AC500
MODBUS
LOAD FD SET FlashDrop parameter values as defined by the FlashDrop
Description
Polish
Turkish
Czech
Hungarian
Greek
Chinese
Korean
Japanese
Selects the application macro. See chapter
macros on page 107.
Standard macro for constant speed applications
3-wire macro for constant speed applications
Alternate macro for start forward and start reverse
applications
Motor potentiometer macro for digital signal speed control
applications
Hand/Auto macro to be used when two control devices are
connected to the drive:
• Device 1 communicates through the interface defined by
external control location EXT1.
• Device 2 communicates through the interface defined by
external control location EXT2.
EXT1 or EXT2 is active at a time. Switching between
EXT1/2 through digital input.
process value, eg, pressure control by the drive running the
pressure boost pump. Measured pressure and the pressure
reference are connected to the drive.
Torque control macro
AC500 PLC macro. See section
page 117.
file. Parameter view is selected by parameter
PARAMETER VIEW.
FlashDrop is an optional device for fast copying of
parameters to unpowered drives. FlashDrop allows easy
customization of the parameter list, eg, selected parameters
can be hidden. For more information, see MFDT-01
FlashDrop user's manual (3AFE68591074 [English]).
Application
AC500 Modbus macro
1611
Def/FbEq
12
13
14
15
16
17
18
19
ABB
STANDA
RD
1
2
3
4
5
6
8
on 10
31