Using The Wizard - Huawei TE40 Administrator's Manual

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Table 2-2 Alarm indicator description
When the Alarm Indicator
Is...
Blinking red twice per second
Blinking red four times per
second

2.2 Using the Wizard

The Wizard helps you quickly set the general, network, and camera parameters on your
endpoint.
Background
When configuring the endpoint for the first time, you can connect to the NMS server to
configure the endpoint. For details, see the HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint V100R001C01 Quick Start Guide. If the NMS server has not been configured or
obtaining the NMS server settings times out, perform the steps in this section to set the
required parameters.
If a USB flash drive is provided with your endpoint, you can also load the configuration file
from the USB flash drive to configure your endpoint. For details, see the HUAWEI
TE40&TE50&TE60 Videoconferencing Endpoint V100R001C01 Quick Installation Guide.
Procedure
Step 1 Choose Advanced > Settings > Installation > Wizard.
The General screen is displayed.
Step 2 Set the general parameters described in
Table 2-3 General parameters
Parameter
Sites
Language
Time zone
Issue 01 (2013-09-30)
The Endpoint Is...
Overheated.
Encountering a temperature fault. For example, the
temperature sensor inside the endpoint cannot sense the
current operating temperature, causing fast fan rotation
speed and loud fan noise.
Description
Specifies the name of your site. The site
name is superimposed on the local video.
When your site joins a multipoint
conference, this site name is displayed in
the site list.
Specifies the language for the remote
controlled UI.
Specifies the time difference between the
local time and the Greenwich Mean
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Basic Configuration and Verification
Table 2-3 and Table 3-3.
Setting
Default value: site
Default value: English
Default value:
13