Display Link-Aggregation Load-Sharing Mode - HP 12500 Series Command Reference Manual

display link-aggregation load-sharing mode

Use display link-aggregation load-sharing mode to display global link-aggregation load sharing
criteria.
Syntax
display link-aggregation load-sharing mode
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display the default global link-aggregation load sharing criteria.
<Sysname> display link-aggregation load-sharing mode
Link-Aggregation Load-Sharing Mode:
Layer 2 traffic: destination-mac address
Layer 3 traffic: destination-ip address
Layer 4 traffic: destination-port
MPLS traffic
# Display the configured global link-aggregation load sharing criteria.
<Sysname> display link-aggregation load-sharing mode
Link-Aggregation Load-Sharing Mode:
destination-mac address
Table 5 Command output
Field
Link-Aggregation Load-Sharing Mode
Layer 2 traffic: destination-mac
address, source-mac address
Layer 3 traffic: destination-ip address,
source-ip address
Layer 4 traffic: destination-port,
source-port
: mpls-label1
mpls-label3
source-mac address
source-mac address
source-ip address
source-port
mpls-label2
Description
Global link-aggregation load sharing criteria.
•
By default, the link-aggregation load sharing criteria for
Layer 2 traffic, Layer 3 traffic, Layer 4 traffic, and MPLS traffic
are displayed.
•
If you have configured the global link-aggregation load
sharing criteria, the configured ones are displayed.
Default link-aggregation load sharing criteria for Layer 2 traffic.
In this sample output, the criteria are the source and destination
MAC addresses of packets.
Default link-aggregation load sharing criteria for Layer 3 traffic.
In this sample output, the criteria are the source and destination
IP addresses of packets.
Default link-aggregation load sharing criteria for Layer 4 traffic.
In this sample output, the criteria are the source and destination
ports of packets.
19