Factory Reset The Headset - Philips SHB4385 User Manual

5 Factory reset
the headset
If you encounter any pairing or
connection issue, you can follow the
following procedure to factory reset
your headset.
1
On your Bluetooth device, go to the
Bluetooth menu and remove Philips
SHB4385 from the device list.
2
Turn off the Bluetooth function of
your Bluetooth device.
3
Power off the headset. Then press
and hold the multi-function button
for 11 seconds on both earpieces.
» You will first hear a voice prompt
"Power on" and then a beep
tone from both earpieces. The
pairing record is now removed.
» Then you will hear a beep tone
on the left earpiece and then
beep tone on the right earpiece.
The earpieces are trying to pair
with each other.
» You will hear 2 beep tones on
the right earpiece and then 2
beep tones on the left earpiece.
The earpieces are now paired
with each other.
4
To pair the headset with a Bluetooth
device, turn on the Bluetooth
function of your Bluetooth device,
select Philips SHB4385.
EN
9