Site Controller - Front Panel Switches; Table 76: Site Controller - Front Panel Switches - Motorola DIMETRA MTS 4 Installation, Configuration, And Service Manual

Applicant: Motorola Solutions
LED LED/Port Name
LED9
LED10
LED11
LED12
LED13
LED14
LED15
LED16
LED17
LED18
Site Controller – Front Panel Switches

Table 76: Site Controller - Front Panel Switches

Switch Name
Reset
Position
Port 3 LED1
BR3
Port 3 LED2
Port 4 LED1
BR4
Port 4 LED2
Port 5 LED1
Service
Port 5 LED2
Port 6 LED1
CAN
Port 6 LED2
Port 7 LED1
E1
Port 7 LED2
Port 8 LED1
Exp.Cab.
Port 8 LED2
Switch Function
The front-panel switch can be used to either generate an interrupt to the processor or to ini-
tiate a Hard Reset.
• Push and hold (1 second) to generate interrupt.
Equipment Type: ABZ89FC5827 / 109AB-5827
Controlled by
• YELLOW: Ethernet activity present.
HW, Enet switch
• OFF: Ethernet link not present.
• GREEN: Ethernet link present.
HW, Enet switch
• OFF: Ethernet activity not present.
• YELLOW: Ethernet activity present.
HW, Enet switch
• OFF: Ethernet link not present.
• GREEN: Ethernet link present.
HW, Enet switch
• OFF: Ethernet activity not present.
• YELLOW: Ethernet activity present.
HW, Enet switch
• OFF: Ethernet link not present.
• GREEN: Ethernet link present.
HW, Enet switch
• OFF: Ethernet activity not present.
• YELLOW: Ethernet activity present.
Not used.
Not used.
• OFF: Primary E1 not configured.
• GREEN: Primary E1 OK (no LOS
(Loss Of Signal)).
• AMBER: Errors FE, CRC, BPV, PD.
• RED: Primary E1 failure LOS.
• OFF: Secondary E1 not configured.
• GREEN: Secondary E1 OK (no LOS
(Loss Of Signal)).
• AMBER: Errors FE, CRC, BPV, PD.
• RED: Secondary E1 failure LOS.
• OFF: Ethernet link not present.
• GREEN: Ethernet link present.
• OFF: Ethernet activity not present.
• YELLOW: Ethernet activity present.
6802800U74-AD | September 2014 |
Site Controller | 269
Indication
Send Feedback
Exhibit D2