Table 2-10: System Commands; Table 2-11: Trigger Commands - Sony 3026 Programmer's Manual

SYSTEM Commands
TRIGGER Commands
3026 Programmer Manual
Table 2 9: STATUS commands (Cont.)
Header
STATus:QUEStionable[:EVENT]?
SRATus:QUEStionable:CONDition?
STATus:QUEStionable:ENABle(?)
Use these commands to set system parameters such as system date and time.
Table 2 10: SYSTEM commands
Header
SYSTem:DATE(?)
SYSTem:ERRor(?)
SYSTem:FTPD[:STATe](?)
SYSTem:TIME(?)
SYSTem:VERSion?
Use these commands to set the trigger conditions for the internal and external
trigger source.
Table 2 11: TRIGGER commands
Header
TRIGger?
TRIGger:COUNt(?)
TRIGger:FREQMASK:CONDition(?)
TRIGger:LEVel(?)
TRIGger:MODE(?)
TRIGger:POSition(?)
TRIGger:SOURce(?)
Description
Destructive query of status register
Query condition register
Set or query register to record event transitions
Description
Set or query system data <year,month,day>
Display the event in the error or event queue
Set or query the FTP setting
Set or query system time <hour,minute,second>
List SCPI compliance version
Description
Query all the current trigger related settings
Set or query the block count
Set or query the trigger condition to trigger using a
mask pattern
Set or query the level of the external trigger signal
that generates the triggering event
Set or query the trigger mode
Set or query the trigger position
Set or query the trigger source
Command Groups
2 13