Issue 7.0
10.9
5 - 110
Mounting the Base to a Standard Wall Plate
The base unit is designed to be mounted on standard wall plate. To attach the
wall mount stand to the base unit:
1.
Slide the wall mount stand into the notches at the top of the base unit.
Rotate the wall mount stand down and snap it into place.
Figure 5-132 Attaching the Wall Mount Stand to the Base Unit
2.
Plug the AC adapter into the base unit.
3.
Place the AC adapter cord inside the molded channel of the wall mount
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Figure 5-131 Polarized Plug
UNIVERGE SV8100